Author: Terry Peterman This post and detailed movie describe just how to put in a roof fan with handy remote control. The addition of a handy remote control to a roof fan enables you to effortlessly adjust the convenience amount of a space. This will be a function my partner especially appreciates, as she will cool our bed room at evening without the need to get free from sleep. The connection of the fan to the receiver, and the receiver to the fan/light unit itself for the purposes of this project, I will focus on the installation of a Hampton Bay 52” Cherokee model remote controlled ceiling fan. We have covered the installing of a ceiling that is standard in great detail in earlier site posts and videos. I would suggest you preview these articles/videos ahead of your trying this task, as they begin to offer you a better comprehension of the essential actions to setting up a roof fan (click on this link to look at these articles and video clip).
We start by unpacking the articles for the package, and discussing the guide to ensure that most of the right parts can be found. As constantly, spend specific focus on the standard security directions, that are primarily focused around switching from the appropriate circuit breaker (and confirming the lack of energy when you look at the socket package through the use of a trusted voltage tester or a power meter) before you start the installing of the roof fan product.
It’s also essential that the socket package you will be mounting the fan to is securely fastened towards the structure with sufficient backing and methods that are mounting of giving support to the fat regarding the roof fan. The socket field we am using let me reveal in a newly built house, as well as the roof containers are installed accordingly, consequently they are designed to be employed to help a roof fan.
Stick to the detail by detail directions when it comes to construction for the fan components, additionally the mounting directions as with any roof fan. As pointed out previously, in this article we are going to mainly focus on the connections to your getting product. If the mounting equipment is with in spot, pull the supply wires out and prepare them when it comes to connections.
According to the directions utilizing the roof fan, before tucking every thing set up and shutting the canopy, be sure the plunge switches within the remote receiver, as well as in the rear of the handy remote control device match one another. You’ll replace the rule for those who have a couple of associated with fans in the house, and also you do not desire the signals from all the transmitters to interfere with one another.
Ensure that all of the cables and connections fit easily within the canopy, and therefore the antenna is extended as best it is possible to, and install the canopy. Finish setting up the remainder roof fan depending on the instructions Now we have to determine which associated with supply cables we are going to have to hook up to the energy in the getting product for the radio control. A white (neutral) wire, a black (switched hot for the fan or the light kit)wire, and a red (second switched for the fan or the light kit) wire all in a 3-wire cable terminated in the ceiling box as this outlet was wired with consideration for the installation of a ceiling fan, we have a bare ground wire. The rc fan just requires one of these brilliant switched hot cables which will behave as a master switch which will provide capacity to the handheld remote control receiver. With all the turn on, the control that is remote run the fan. Utilizing the turn off, the machine will not work.
Determine which regarding the two switches you need to function as the master switch. One other switch will not be used and may be properly de-commissioned by using a switch filler unit.
In this example, the switch closest to your entry home is actually for the black colored wire, therefore we will make use of it as our control energy, and we will cap from the red cable by having a cable nut, and carefully tuck it up in to the socket package. This renders us with a ground, a white, and a black colored cable as our supply conductors. The mounting hardware for the fan was created to house the handheld remote control receiver, but there is not a lot of space within the canopy regarding the fan however it will all easily fit into. You need to be careful that your particular connections are great, and therefore you tuck into the splices towards the available room after the receiver is in spot.
Connect the wire that is green the bare ground cable, the white cable through the receiver to your white supply cable, while the black colored power cable to your black colored power wire for the receiver product.
The cables through the ceiling fan device then get attached to the wires that are controlled of this receiver, white to white, black colored to black colored, and blue to blue.
Now place the canopy in position and install all of those other fan depending on directions supplied.
Now install the light kit depending on the instruction manual.
Now our company is willing to restore the charged capacity to the circuit, switch on the wall surface switch, and test the function associated with the fan.
In summary, remember this post would be to focus on the connection associated with remote portion that is controlled of installation. To get more instruction that is detailed the complete procedure of setting up a roof fan, you’ll find links to these other articles and videos underneath the “Related Posts” section in the bottom with this article, or through the after links (click the adult hub the link to see these articles and video clip).
And remember – If you’re not comfortable and confident in properly finishing a project such as this all on your own, click on this link to locate a trusted, licensed electrician in where you live. Terry Peterman, The Web Electrician